XD549
8-bit analog to digital conversion serial controller
Handheld device
Portable monitors and power management
Industrial signal monitoring
Measurement and control instrument
XL549 is an 8-bit serial A/D converter chip, which adopts CMOS technology and realizes A/D conversion by 8-bit switching capacitor successive approximation method. It can be serial interface with general microprocessor and controller through CLK, CS and DATAOUT, and constitute a variety of cheap measurement and control application systems. With a 4MHz on-chip system clock and hardware and software control circuit, the conversion time is up to 17μs, and the XL549 sampling is 40,000 times /s. The maximum total out-of-balance error of other functions is ± 0.5LSB, and the typical power consumption is 6mW. Differential reference voltage high resistance input, anti-interference, can be calibrated according to the proportional scale conversion range, VREF+-VREF-≥1V, can be used for small signal sampling.
● Adopts three-wire serial mode and microprocessor interface
● 8-bit resolution AD converter
● Typical internal system clock of 4MHz
● On-chip sampling and holding circuit,conversion time ≤17us
● Differential voltage input
● Wide operating voltage 3V-6.5V
● Low power consumption 15mW
● Total offset error is ≤±0.5LSB
● Sampling speed 40000 times /S
● An internal 4MHz system clock is provided on chip and is independent of the external I/OCLOCK for operation control
● Available package : SOP8 (XL549),DIP8 (XD549)
Product | Package | Operating temperature | QTY. | ROHS | Apply for samples |
---|---|---|---|---|---|
XD549 | DIP-8 | -40~+85℃ | 2000 pcs/Tube | ✔ | Sample application |