● Compliance with physical layer standards: ISO 11898-2(2016)
● In the CAN FD fast phase at data rates up to 5 Mbit/s.
● Supports SAE J2962-2 and IEC 62228-3 (up to 500kbps) without the need for common-mode chokes
● VCC operates on a single supply voltage range of +4.5V to +5.5V
● I/O voltage and VCC are separated
● and VIO range is +2.7V to+ 5.0V
● Undervoltage protection on VCC and VIO power supplies
● Low power standby mode ( 10uA Typical ) with host and bus wake-up capability
● Transmitter dominant timeout (TXD DTO) for data rates as low as 10kbps
● Support thermal shutdown protection (TSD) function
● Ideal passive behavior when unpowered: high-impedance state on bus and logic pins (no load)， enabling seamless power-up/power-down operation on the bus and RXD output
● CANH/CANL HBM (Human Body Model) rating: ±8kV，CDM (Charged Device Model) ±2KV CAN Bus fault protection: ±58V
● Receiver Common-Mode input voltage range: ±30V
● Operating junction Temperature range: –40°C to 125°C
● Available in SOP8 package
